1/24/15

DT1 MX project

I got the clutch on, and started polishing the clutch cover, so the bottom end is just about ready to button up.
101_0639

I've got the cylinder porting nearly done. I just need to finish up with sand paper and polish the exhaust port, and then get it out for boring.
101_0641

101_0645

101_0649

101_0650

101_0651

101_0654

2 comments:

  1. Hunter03 February, 2015

    what are the specs on the port job? Were you able to find a port map to go off of?

    ReplyDelete
  2. Joe C07 February, 2015

    I don't have any specs or map, since I'm not changing the port timing, but just some cleanup.

    ReplyDelete