7/5/14
DT1 flat track project
It's getting closer! I'm super happy with how the gold paint and red badges look on the tank.
6/29/14
XT500 project
I didn't want to use the stock number plate style side covers on the XT, but wanted something on there since I'm trying to make the bike look like it came stock from the factory. I'm shaping some small side covers from steel, and got them most of the way done. They just need some fine tuning and mounting brackets.
I like them. They'll be painted the same color as whatever I paint the LT3 tank.
I like them. They'll be painted the same color as whatever I paint the LT3 tank.
DT1 flat track project
I got up this morning while the bugs are sleeping to clear coat the gas tank. I'm using SprayMax 2K. It is a two component paint.
It came out pretty decent, and should look fine on the bike. This is the first time I've used the SprayMax clear, and one thing I like better than other rattle can clears I've used before is that it seems to have a wide window between flowing out and to where it runs. Some of the $6 clears I've used want to sag as soon as you get close enough to smooth out.
It came out pretty decent, and should look fine on the bike. This is the first time I've used the SprayMax clear, and one thing I like better than other rattle can clears I've used before is that it seems to have a wide window between flowing out and to where it runs. Some of the $6 clears I've used want to sag as soon as you get close enough to smooth out.
6/28/14
DT1 MX project
I bought a 2" lowered '69 DT1 frame. It had been listed on ebay from a seller in California for quite some time, and I couldn't resist any longer. I've got some left over or spare parts, so figured I could put together something simple and fun for not much money using it. Here is a picture from the listing of the bike the frame is from.
Here is the frame after it got here Thursday. Just as the seller described, it has a small crack above the key switch bracket that will be an easy fix, but is otherwise straight and in great shape.
These are the areas where the engine cradle and swingarm pivot parts of the frame were cut and lowered, probably using a Webco kit. This was done to make the bike handle better.
I dug out some parts to make it a roller. The '73 RT3 tank and '72 RT2 seat pan were parts I ended up not using from the DT flat track project. The forks and wheels are XT500. The engine is a '73 250. The swingarm is from a '77 RM250. The front fender is a NOS Preston Petty that I'd been saving to use on my DT3 someday, but likely will use it on this instead.
The RM250 swingarm was a simple fit. The early square tube swingarm DT1 has a swingarm pivot bolt diameter of 12mm, and the RM is 14mm, so I just drilled out the frame to 14mm. The RM pivot is more narrow, so I used some washers to make up the difference. The shock mounts are 1/2" closer together on the DT frame, so I'll likely move them out 1/4" on each side, and farther forward so the shocks aren't quite so vertical. The RM uses adjuster spacers that are 17mm on the right side and 15mm on the left. I'll probably modify the left side to use 17mm also so I don't have to use a stepped RM axle. Other than a few little things, I think I just need to sort out an expansion chamber, and it's ready for finish work.
Here is the frame after it got here Thursday. Just as the seller described, it has a small crack above the key switch bracket that will be an easy fix, but is otherwise straight and in great shape.
These are the areas where the engine cradle and swingarm pivot parts of the frame were cut and lowered, probably using a Webco kit. This was done to make the bike handle better.
I dug out some parts to make it a roller. The '73 RT3 tank and '72 RT2 seat pan were parts I ended up not using from the DT flat track project. The forks and wheels are XT500. The engine is a '73 250. The swingarm is from a '77 RM250. The front fender is a NOS Preston Petty that I'd been saving to use on my DT3 someday, but likely will use it on this instead.
The RM250 swingarm was a simple fit. The early square tube swingarm DT1 has a swingarm pivot bolt diameter of 12mm, and the RM is 14mm, so I just drilled out the frame to 14mm. The RM pivot is more narrow, so I used some washers to make up the difference. The shock mounts are 1/2" closer together on the DT frame, so I'll likely move them out 1/4" on each side, and farther forward so the shocks aren't quite so vertical. The RM uses adjuster spacers that are 17mm on the right side and 15mm on the left. I'll probably modify the left side to use 17mm also so I don't have to use a stepped RM axle. Other than a few little things, I think I just need to sort out an expansion chamber, and it's ready for finish work.
6/21/14
Triumph of Lafayette
Out on the Speed Four this morning I stopped in at Indian Motorcycle of Lafayette. They just started carrying Triumph, and were having an open house. I also hadn't seen the new Indians in person yet. The location use to be the home of Eagle Harley-Davidson until just recently, which is where I bought my Sportster in 2003.
Subscribe to:
Posts (Atom)